Acoustics of baroque, classical and modern flutes

modern flute
C foot

multiphonic
C5, B5 & G6
Music Acoustics UNSW

modern B modern C classical C classical D classical flared baroque B3
C4 C#4 D4 D#4 E4 F4 F#4 G4 G#4 A4 A#4 B4
C5 C#5 D5 D#5 E5 F5 F#5 G5 G#5 A5 A#5 B5
C6 C#6 D6 D#6 E6 F6 F#6 G6 G#6 A6 A#6 B6
C7 C#7 D7 D#7 E7 F7 F#7 multiphonics

Impedance

Fingering
 a key depressed
a key not depressed
a part of the mechanism that is not normally touched
Details in fingering legend.

Acoustic schematic
a closed tone hole
an open tone hole

Non-specialist introduction to acoustic impedance
Non-specialist introduction to flute acoustics


Impedance spectrum of a modern flute with a C foot measured at the embouchure hole using fingering for the multiphonic C5, B6 & G6. Z is plotted in dB, i.e. 20 log(Z/Pa.s.m-3).

This is the standard fingering for G6, but it may also be considered as the fingering for C5/6 with enough cross fingering to flatten C5 a little, and C6 a semitone. The 4th, 1st and 2nd minima, respectively, correspond to these pitches. The 3rd is unplayable.

The Virtual Boehm Flute may suggest other fingerings for this multiphonic.
Fingering legend
How were these results obtained?
Acoustic measurements are available for these flutes -
modern B, modern C, classical C, classical D, classical flared, baroque
Sound clips are available for modern B, classical flared and baroque		 To compare flutes, it is easiest to open a separate browser window for each instrument.
Copyright © Academic Press. JSV+ Joe Wolfe, John Smith, John Tann and Neville H. Fletcher, Acoustics of baroque, classical and modern flutes
Revised to include the baroque flute 2001.